. Amino 140 User Guide Amino A140™ Amino A140 - The next generation MPEG-2 and MPEG-4 HD IPTV set top box (STB) User Guide V1.0 Teracue eyevis GmbH Schlossstr. 18 85235 Odelzhausen Germany Tel: +49 (0)8134-555-10 Fax: +49 (0)8134-555-199 [email protected] www.teracue.com.
Mail to: [email protected] All information within this document is confidential to Teracue costumers and should not be copied or distributed to non Teracue customers. All Teracue products and all of its components are registered trademarks RADEMARKS licensed to Teracue.
Amino 140 User Guide Content OVERVIEW.4 SETUP. 5.5 ORMAL SETTINGS.
7 DVANCED SETTINGS 2.2.1 Video settings in the main menu.7 2.2.2 Video settings in the user preferences.7 2.2.3 Browser settings. 8 2.2.3.1 Home Page.
Amino 140 User Guide Overview This User Guide is written for the amino A140 with Opera 10 Firmware 2.1.3 and higher. Older firmware versions, also on amino 130, maybe look different, but have nearly the same features. The needed passwords are. Normal settings For a fast configuration please do the following steps. Connect the amino 140 with power, LAN and a video cable to you TV, Teracue recommend HDMI to have the best quality. Use an USB keyboard or the special amino IR keyboard, to enter the menu.
Amino 140 User Guide 6. Change the IP-settings Teracue delivers all Aminos with DHCP enabled. If a DHCP Server is configured, you can start working immediately with the amino A140. For remote control, Teracue recommends disabling DHCP and configure the IP-address, Netmask and Gateway in the DHCP menu. Amino 140 User Guide Advanced settings 2.2.1 Video settings in the main menu: To turn the ‘IGMP end timeout’ or other timeouts off, please change these values to “0”.
PROFESSIONAL QUALITY SERVICE & REPAIR MANUALS ALWAYS! SUPER FAST DOWNLOAD DELIVERY ON ALL ORDERS! Sears service repair.
Figure 4: Video settings in the main menu 2.2.2 Video settings in the user preferences: To open the user preferences, please do following: a) A140: Press ‘MENU’. EM remote control Central Zapper workingchan.html website Fake Key bigger Installations 10 Zapping EM remote control iCue website Fake Key need iCue Server bigger Installations 10 Zapping ElementManager EM remote control Zapper Fake Key need Element Manager. Amino 140 User Guide 2.2.3.2 GFX resolution Independent to the used video resolution of the TV, this setting configures the graphic resolution in which the website is displayed. Teracue Websites are optimized for 720 HD.
Figure 6: Amino Browser setting. User Guide Amino Usage There are different possibilities to use the amino A140. Use it like your TV at home, or switch the TV channels remotely or via a schedule. Open a multicast or unicast stream at the start page Press ‘F10’. 3.3.1 Element Manager The Teracue Element Manager offers the possibility to remotely control the amino from a PC or a media controller such as Crestron or AMX. Additional you are able to use the Element Manager scheduler for automated channel switching The details of the protocol are described in the Element Manger User Guide.
Download the Firmware ‘mc2.mcfs’ from:from Teracue, please write to [email protected] To use Teracue Element Manager, Teracue requires the Teracue Firmware to have all the functions available. 4.1.1 Upgrade from Webserver. How-to: prepare your Webserver that you could download the firmware. Test it with the browser on your Computer Browser e.g. In smaller environment where you work with local channel List, edit the local channel list with Alt+C on every amino or do following: 4.2.1 New Firmware Build a new firmware with included ‘local channel list’, or ask Teracue for a new firmware. 4.2.2 Copy new chnls.txt.!
An improper chnls.txt can destroy the image. Amino 140 User Guide 4.2.2.2 Copy new chnls.txt via TFTP Start a TFTP Server on your computer Teracue recommend TFTPD from Figure 10: TFTP Server Copy the new chnls.txt to the TFTP folder Use putty from. Please use Teracue Firmware 14.21 or higher b) Does Amino 140 support HLS streaming? Yes since Teracue Firmware 14.10 or higher HLS is supported c) Does Amino 140 support Teletext on HDMI Yes when in the Transport Stream Teletext is enabled you could open the Teletext with the recording button, or the text button. Amino 140 User Guide Appendix Invalid Video Mode A simple method of video mode recovery is the following: Power cycle the box, and while it is booting hold down the OK button on the remote and point to the front of the Amino (keep the button pressed).
The fake Key protocol does not give you any feedback.! Fake Keys is an unsecure protocol and should only be used in closed environments.! Fake Keys is not enabled on all Teracue Amino Firmware.! Sending ‘0’ or wrong commands disable the IR receiver until next reboot.
Amino 140 User Guide 6.3.2 IR Remote control commands 6.3.2.1 The IR Remote Key IR Key Function Fake Key (Dez) Standby (toggle) Play, Pause, Stop, Record 7,12,9,11 Forward, Rewind 8,10 Red, Green, Yellow, Blue 20,21,22,23 Cursor up, down, left, right 37,38,39,40 UP, Down 33.34. Amino 140 User Guide 6.3.2.2 Complete Fake Key codes Command Dezimal keyupdown keyup keydown IR ON IR OFF CIRBTNCHUP CIRBTNCHDOWN CIRBTNVOLUP CIRBTNVOLDOWN CIRBTNMUTE CIRBTNTVPOWER CIRBTNVIDPLAY CIRBTNVIDFORWARD CIRBTNVIDSTOP CIRBTNVIDREVERSE CIRBTNVIDRECORD CIRBTNVIDPAUSE CIRBTNVIDPLAYPAUSE CIRBTNRELOAD CIRBTNWWWTV CIRBTNFORWARD CIRBTNHELP CIRBTNRECORD CIRBTNBACK CIRBTNRED CIRBTNGREEN CIRBTNYELLOW CIRBTNBLUE CIRBTNMENU CIRBTNHOME.
![]()
Amino 140 User Guide Command Dezimal keyupdown keyup keydown CIRBTNINFO CIRBTNSTB CIRBTNEXIT CIRBTNGUIDE CIRBTNLAST CIRBTNDTV CIRBTN0 CIRBTN1 CIRBTN2 CIRBTN3 CIRBTN4 CIRBTN5 CIRBTN6 CIRBTN7 CIRBTN8 CIRBTN9 CIRBTNMOVIES CIRBTNMUSIC CIRBTNMEDIA CIRBTNRECORDIT CIRBTNPROMOS CIRBTNPHONE CIRBTNINPUT CIRBTNLASTCH CIRBTNCLOSEDCAPTION CIRBTNHOSP1 CIRBTNHOSP2 CIRBTNREDMETA CIRBTNGREENMETA CIRBTNYELLOWMETA CIRBTNBLUEMETA CIRBTNRIGHTMOUSE CIRBTNSKIPBACK CIRBTNSKIPFORWARD. Amino 140 User Guide Command Dezimal keyupdown keyup keydown CIRBTNADD1 CIRBTNADD2 CIRBTNADD3 CIRBTNSEARCH CIRBTNSAP CIRBTNFAVOURITES CIRBTNVOD CIRBTNADVANCE CIRBTNDAYNEXT CIRBTNDAYPREV CIRBTNASPECT CIRBTNCC ENGLISH Keyboard Dezimal keyupdown keyup keydown KNULL KESC KMINUS KEQUALS KBSPACE KTAB KLSQBR KRSQBR KENT KLCTRL. Amino 140 User Guide Command Dezimal keyupdown keyup keydown KCOLON KAPOST KBACKTICK KLSHIFT KBSLASH KCOMMA KFSTOP KFSLASH KRSHIFT KKPASTER KLALT KSPACE KCAPLCK KF1 KF2 KF3 KF4 KF5 KF6 KF7 KF8 KF9 KF10 KNUMLCK KSCRLCK KKPHOME KKPUP KKPPUP KKPMINUS. Amino 140 User Guide Command Dezimal keyupdown keyup keydown KKPLEFT KKP5 KKPRIGHT KKPPLUS KKPEND KKPDOWN KKPPDOWN KKPINS KKPDEL KF11 KF12 KKPENT KRCTRL KKPFSLASH KPRSCR KRALT KHOME KUP KPUP KLEFT KRIGHT KEND KDOWN KPDOWN KINS KDEL KPAUSE Amino IR Keyboard specific Dezimal keyupdown keyup keydown. Amino 140 User Guide 6.3.2.3 Examples Open the Amino Menu send following commands To send the sequence Alt-M LEAVES OK you do the following: = 56 + 768 // press left Alt + (keydown) = 50 + 256 // M + (keyupdown) = 56 + 512 // release left Alt + (keyup) = 38 + 256. Amino 140 User Guide List of figures 1: S.5 IGURE TART PAGE OF THE AMINO 2: L.5 IGURE OGIN AT THE AMINO 3: IP-C.6 IGURE ONFIGURATION AT THE AMINO 4: V.
Amino A140 Configuration Guide
7 IGURE IDEO SETTINGS IN THE MAIN MENU 5: S '.
. By default, the Amino TV set top box is designed to automatically grab an IP address using the DHCP settings on your wireless router.
However, if you have customized your router settings to rely on static IP addresses rather than randomly assigned DHCP addresses, you will need to configure the Amino by entering the IP address manually. Using the Amino's wireless keyboard, you can do this by accessing its Network Configuration options. The process should only take about a minute or so. Video of the Day.
Have any questions concerning the operation or maintenance of your motorcycle. This manual should be considered a permanent part of this motorcycle and. Yamaha Motor Co., Ltd. Is expressly prohibited. IMPORTANT This manual was produced by the Yamaha Motor Company, Ltd. Primarily for use. Yamaha r1 2017 service manual. View Yamaha Owner's Manuals Online. The Yamaha Owner's Manual Section offers the ability to view Owner's Manuals for many past Yamaha models. 2017 Yamaha YZF-R1 — Owner's Manual. Posted on 30 Jul, 2017. Model: 2017 Yamaha YZF-R1 Pages: 130. File size: 10 MB. Download Manual.
More TV apps, OTT content and services. YouTube TV – the top ranked online video streaming service on TV with a comprehensive library of user-generated and studio-produced content More engaging experiences.
Graphically rich user interfaces with smoother and faster transitions alongside improved 2D and 3D graphic effects. Full HD quality video with support for 1080i60 decode for full screen playback and picture-in-picture (PiP). More content delivered from anywhere. Increase the breadth of content that you can offer to your customers. Whether the content is delivered by managed IP, over the open Internet or from the home network – the H150 can seamlessly manage and integrate it all Power over Ethernet.
Power the set top box using the built-in internal Power over Ethernet (PoE) capability, allowing customers to install H150s where a mains power supply not available Rugged mountable case. The unit’s robust enclosure incorporates an integrated mounting system that is VESA compliant to attach the H150 to most TVs CEC control. The H150 provides CEC control over HDMI. This feature allows system integrators to provide an integrated solution with TVs that also support CEC Serial interface. The H150 is equipped with an RS-232 serial interface that can be used as a connection interface to hospitality televisions for single remote control use.
Size and weight 140mm x 114mm x 40mm. 320g (excluding accessories and packaging) Inputs 1 x Ethernet 10/100 BaseT via RJ-45 shielded connector Outputs HDMI 1.3a. With HDCP and CEC 10-way Mini-DIN for Composite video, Component (YPrPb), RGB, S-Video and analogue audio. S/PDIF (optical). RS232 serial connector Power 5V DC at 1.5A via external power supply Less than 8W typical usage (external supply input voltage 100-240V AC 50-60Hz 3A max) CODECS MPEG-2 MP@HL.
MPEG-4 pt10 AVC/H.264 HP@L4 Video resolutions up to 720p and 1080i. Displays up to 1080p Graphics resolutions HD graphics up to 1280×720 Audio Analogue stereo audio out. Stereo and Dolby 5.1 surround via S-PDIF and HDMI. Dolby Digital+ pass through to external decoder Security Wide selection of DRM and Conditional Access support. HDCP on HDMI. Macrovison on SD outputs (optional), CGMS-A Memory 128MB Flash, 256MB RAM Front panel LEDS Power on /IR command received (Red) Operating environment ETS 300-019-1-3 Class 3.1 EMC Conformance FCC Part 15 class B. 2004/108/EC EN55022 Safety approvals CAN/ CSA-C22.2 No.
EN60950 ROHS 2002-95-EC WEEE 2002-96-EC Operating temperature 0˚C (32˚F) to 40˚C (104˚F) Storage humidity 5% to 95% RH (non-condensing).
. Digital TV Amino Set Top Box Instructional Manual Connected Connected Connected Digital TV powered by Celect Communications Your pathway to the world 328 W Main St New Auburn, WI 54757 Phone (715)237-2605 Web: www.citizens-tel.net. Table of Contents REMOTE CONTROL GUIDE Remote Overview Programming your Remote Control Powering Devices Adjusting Volume Frequently Used Commands Changing Channels Finding Programming Blocking Channels (For added protection) USING MENU Using the Menu Button Using the Guide Option Using the DVR Option Using the My Library Option Using the Settings Option Using the Favorites Option. Viewing a History of Incoming Calls USING DVR Digital Video Recorder (DVR) Controlling LIVE Programs Recording Programs Viewing a Recorded Program Scheduling an Event SET TOP BOX GUIDE Amino A140 Set Top Box Amino A540 Set Top Box TROUBLESHOOTING GUIDE.
Remote Control Guide Input Button Power Set Top Box Power Controls Controls Menu Stop Button (Main Menu) DVR Button (Listing of Recordings) Info (Channel Name & Number, Directional Arrows Current Program, etc.) (Use to move to information) (Makes your selection) Back Button Exit (Returns to Programming). Use the following steps to program your TV into your Remote Control. Determine the manufacturer of your TV set. Look up the 4-digit manufacturer code located in the Amino Remote Control Guide. Make sure your TV set is turned on. Remote Control Guide Adjusting Volume In order to adjust the volume using your Remote Control, you will need to first program your TV into the Remote. If you have not done so already, refer to Programming your Remote Control above.
![]()
Once it is programmed you can: 1. Finding Programming Using the Guide and Info buttons will allow you to find information on current and future programming. Using the Guide button 1.
Press the Guide button on your Remote Control. On the left hand side of the screen, under the live picture, you will see with the text ALL next to it. Using Menu Using the Menu Button The Menu is an easy way to access any features you may have. Pressing the Menu button will provide you the following options: 1. Sign In/Out (If Login Required) 5.
Using the Guide Option The Guide option allows you to view information on current and future programming including Channel Name & Number, a brief description of the program, rating, start and end times, and date. To access the Guide feature you can: 1. Using Menu (continued) Using the DVR Option continued (If applicable) Selecting Schedule Event The Schedule Event option allows you to set up recordings for programs that will be airing in the future. (See page 25 for Scheduling an Event.) Selecting Record History The Record History option displays a list of the recording information such as when the recording started, was completed, or was cancelled. Using the Settings Option The Settings option allows you to create/edit preferences and create/edit users. To access the Settings feature: 1. Press the Menu button on your Remote Control.
Using the Directional Arrows, highlight Settings or and press OK. Using Menu (continued) Using the Sign In/Out Option The Sign In/Out option allows you to change Users once multiple users are available. (See Setting up Parental Controls below.) Setting up Parental Controls Establishing New Password & PIN (For added protection) As the Main User, you will have administrative access to features such as Parental Controls. Setting up Parental Controls To set up Parental Controls follow these steps: 1. Press the Menu button on your Remote Control 2. Using the Directional Arrows highlight Settings and press OK 3.
Using the Number Pad enter your password and press OK 4. Setting up Parental Controls (continued) Unlocking/Reactivating Parental Controls If under the Main User settings you have blocked PG13 movies, and you find one that you would like to watch, you can unlock the Parental Controls while you are on that channel with the following steps: 1.
Creating Users continued b. You will now see a left and right arrow on the sides of the field, using the Directional Arrows press the left and right arrows to set the ratings.
(Remember: The Movie rating that is selected will be viewable.) c. Setting up Parental Controls (continued) Editing User Information 1. Using the Directional Arrows, highlight the desired User and press OK to place a dot in the circle next to the Username. Using the Directional Arrows, highlight Edit and press OK.
Selecting Edit The Edit option allows you to add or remove channels from the Favorites folder(s) by: 1. Using the Directional Arrows, highlight Edit and press OK. It will automatically show the folder that is currently selected as the Guide list.
TV & Movie Ratings Guide TV Parental Guidelines Ratings All Children This program is designed to be appropriate for all children. Whether animated or live-action, the themes and elements in this program are specifically designed for a very young audience, including children from ages 2 - 6. Motion Picture Association of America Ratings General Audience A G-rated motion picture contains nothing in theme, language, nudity, sex, violence, or other matters that, in the view of the Rating Board, would offend parents whose younger children view the motion picture. The G rating is not a “certificate of approval,” nor does it signify a “children’s”. Purchasing Events Purchasing PPV (Pay per View) Events If there is an event on the PPV channels, you can purchase them at any time, for an additional cost that may vary per program. Note: There are two types of PPV Events: PPV and ADT.
PPV is a single event and only lasts until the event is completed. Canceling PPV (Pay per View) Events If for some reason, you are not able to or do not want to view the scheduled PPV event at this time, you have You cannot cancel the event once it has started, this includes the option of canceling the purchase. Using Advanced Features Using the Reminder & Autotune Features If, in the process of scrolling through the channels, you find a program that will be showing at a later time or date you can use the Reminder or Autotune features to make sure you don’t miss it. Once you have found the program you would like to view at a later time or date press OK to select an action and you will see the following options: 1. Viewing a history of Reminders If you have set any Reminders for programs, you can view them by: 1. Pressing the Menu button on your Remote Control.
Using the Directional Arrows, highlight My Library or and press OK. You will see the following options: a. Using DVR Digital Video Recorder (DVR) The DVR, which is also known as a PVR, allows you to record programs on your Set Top Box to view at a later time as well as pause, fast forward, play, or rewind LIVE programs.
This feature is only available if you have a DVR Set Top Box. To Stop the current recording: 1. Using the Directional Arrows, highlight Stop Recording and press OK. A pop-up box with the question “Would you like to stop recording?” To exit, select No.
To stop recording, select Yes. To Extend the current recording time: 1. Using DVR (continued) SERIES To edit a of programs: 1. In the Guide, highlight the program and press OK 2. You will see the following options: a. Edit Recording b. Edit Series Recording c.
Skip Episode d. Cancel Series Recording e. If you decide at a later time that you would like to record that episode again: a. Press the Guide button on your Remote Control b. Using the Directional Arrows, highlight the program and press OK c.
You will see the following options: i. Using DVR (continued) Selecting Lock The Lock option allows you as the Main User to block the other Users from viewing or deleting your recorded program. To lock the program: 1. Make sure the program you would like to lock is highlighted. Amino A140 Set Top Box Guide Front Panel View Rear Panel View Reset Button Below is an explanation for each of the connections listed above.
The Analogue AV Output is for Composite Video, Component(YPrPb), RGB, S-Video, and Analogue Audio. The HDMI (High-Definition Multimedia Interface) connects to a high-definition TV or home theater receiver with an HDMI input (for a DVI input, use an HDMI-to-DVI adapter.).
Amino A540 DVR Set Top Box Guide Front Panel View Rear Panel View Below is an explanation for each of the connections listed above. The RF Output is for connecting your Set Top Box to another TV. The Analogue AV Output is for Composite Video, Component(YPrPb), RGB, S-Video, and Analogue Audio. Troubleshooting Guide Here are some solutions to problems you may encounter. If you need further assistance, please contact Citizens at (715)237-2605 or Just Dial 611. PROBLEM: LED light on the remote blinks, but the component doesn’t respond.
POSSIBLE SOLUTIONS: (1) Try replacing the batteries. You will need two AAAs. (2) The component may not be programmed into your remote. PROBLEM: VCR will not record.
POSSIBLE SOLUTIONS: (1) The signal may not be reaching your TV. Make sure all the cables are connected properly on the back of your VCR and your TV. (2) The TV may not be on the right channel to display input.
Make sure the TV is on the correct channel. (3) Make sure you are using the correct Remote Control. Troubleshooting Guide (continued) PROBLEM: Why doesn’t my non-DVR Set Top Box show my DVR Recordings? POSSIBLE SOLUTIONS: You will need to make sure you are signed up for Whole Home DVR Access. If you are simply unplug your DVR Set Top Box and plug it back in to reboot the system.
PROBLEM: Why do I get the message “Video Channel is blocked”. Citizens Connected 328 W Main St PO Box 127 New Auburn, WI 54757 Ph: (715)237-2605 Website: www.citizens-tel.net Created 11/20/13. I have a problem that is NOT addressed in troubleshooting. I have a problem playing my recorded programs. The message reads PROGRAM TIMED OUT DELTE OR TRY LATER. I have had tech people replace the DVR set top boxes several times but the problem is still there but more random. I hate this system but my provider says it is the most updated system.
The manual for AMINO is TERRIBLE. Very little information same here on your site.
I am just commenting to vent here guess I am stuck unless I switch to Dish. I have HBC Fiber Optic Cable which is excellent until they upgraded me to AMINO. Jane Wegener Wabasha, Minnesota.
Size and weight 114mm x 100mm x 35mm. 280g (excluding accessories and packaging) Inputs Ethernet 10/100 BaseT via RJ-45 shielded connector Outputs HDMI 1.3a. Deep colour and DTS audio) with HDCP. S/PDIF (optical). 10-way Mini-DIN for Composite video, Component (YPrPb), RGB, S-Video and analogue audio.
RF Modulator and loop through. Power 5V DC at 1.5A via external power supply. Less than 8W typical usage (external supply input voltage 100-240V AC 50-60Hz, 0.8A max, output 5VDC 3A) Codecs MPEG-2 MP@HL. MPEG -4 pt10 AVC/H.264 HP L4 Video resolutions Decodes up to 720p and 1080i.
Amino A140 Configuration Guide
Displays up to 1080p Graphics resolutions HD graphics up to 1280×720 Audio Stereo audio and Dolby 5.1 surround via S/PDIF and HDMI. Dolby Digital+ pass through to external decoder Security Wide selection of DRM and Conditional Access support. HDCP on HDMI. Macrovision (optional) CGMS-A signalling pass through Memory 128MB Flash, 256MB RAM Front panel LEDs Power on/IR command received (Red) Operating environment ETS 300-019-1-3 Class 3.1 EMC conformance FCC Part 15 class B. 2004/108/EC EN55022 Safety approvals CAN/ CSA-C22.2 No. 60950-1-03 EN60950 RoHS 2002-95-EC WEEE: 2002-96-EC Operating temperature 0˚C (32˚F) to 40˚C (104˚F) Storage humidity 5% to 95% RH (non-condensing).
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |